Hello, there seems to be an issue with our Dexi drone airframe firmware. When Generic Quadcopter is clicked upon, there is not an option for Drone Blocks DEXI 5. Does anyone have a suggestion on how to fix the issue? Thank you!
We had this same problem, your Q Ground control probably needs to be updated. Hope this helps
Hello, Please ensure your QGroundControl (QGC) is updated to the latest version. The DEXI airframe was added in version 4.4.1. You can download the latest release of QGC from the following link:
Thank you, we got it working, But now we are having another issue. When assigning motors on QGroundControl, no motor spins. Although when clicking the numbers on the picture as shown the motors spin. Our motors 3 and 2 are assigned in the correct positions unfortunately our motors 1 and 4 spin at the exact same time when clicked upon. Any suggestions?
Check your esc wiring to make sure that the correct wires are going to each motor as if it’s mixed it could be causing the problem stated. I can send you a picture tomorrow if you’d like.
Thank you, if you could send a picture that would be great!