# PCC servo count to 8

**URL:** <https://forum.theavr.org/t/pcc-servo-count-to-8/857>\
**Category:** AVR Drone Software\
**Created:** [June 14, 2024, 11:07pm UTC](https://forum.theavr.org/t/pcc-servo-count-to-8/857 "2024-06-14T23:07:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Popp](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/popp/32/359_2.png) [@Popp](https://forum.theavr.org/u/Popp)\
**Post date:** [June 14, 2024, 11:07pm UTC](https://forum.theavr.org/t/pcc-servo-count-to-8/857/1 "2024-06-14T23:07:23Z")

</div>

Hello our team was wondering how to make use of all 8 of the servo ports, could anyone help us figure this out? Thank you

---

<div class="post-metadata">

**Author:** ![GioOC8](https://avatars.discourse-cdn.com/v4/letter/g/e68b1a/32.png) [@GioOC8](https://forum.theavr.org/u/GioOC8)\
**Post date:** [August 19, 2024, 7:41pm UTC](https://forum.theavr.org/t/pcc-servo-count-to-8/857/2 "2024-08-19T19:41:48Z")

</div>

I believe the first 4 servos (0 to 3) are controllable using the GUI, while servos 4-7 seem to be movable only using autonomous code.