# Motors wont spin individually

**URL:** <https://forum.theavr.org/t/motors-wont-spin-individually/680>\
**Category:** AVR Drone Hardware\
**Created:** [October 23, 2023, 3:00pm UTC](https://forum.theavr.org/t/motors-wont-spin-individually/680 "2023-10-23T15:00:38Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![GymLeaderBrock](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/gymleaderbrock/32/452_2.png) [@GymLeaderBrock](https://forum.theavr.org/u/GymLeaderBrock)\
**Post date:** [October 23, 2023, 3:00pm UTC](https://forum.theavr.org/t/motors-wont-spin-individually/680/1 "2023-10-23T15:00:38Z")

</div>

In Q ground control when we test each motor individually motor 1 and 2 spin at the same time. We have checked the wiring to the motors and they look correct. So we were wonderings if we could have some suggestions on what it could be?

---

<div class="post-metadata">

**Author:** ![Tylr](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/tylr/32/310_2.png) [@Tylr](https://forum.theavr.org/u/Tylr)\
**Post date:** [October 23, 2023, 4:18pm UTC](https://forum.theavr.org/t/motors-wont-spin-individually/680/2 "2023-10-23T16:18:10Z")

</div>

Most definitely is an ESC wiring issue; triple, quadruple check this section of the documentation. [FC to ESC Wiring | Bell AVR Documentation](https://bellflight.github.io/AVR-2022/basic-drone-assembly/flight-controller-wiring/)

---

<div class="post-metadata">

**Author:** ![GymLeaderBrock](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/gymleaderbrock/32/452_2.png) [@GymLeaderBrock](https://forum.theavr.org/u/GymLeaderBrock)\
**Post date:** [October 24, 2023, 9:00pm UTC](https://forum.theavr.org/t/motors-wont-spin-individually/680/3 "2023-10-24T21:00:56Z")

</div>

I just checked and it looks correct so what else could it be?