# Jetson setup issue

**URL:** <https://forum.theavr.org/t/jetson-setup-issue/668>\
**Category:** AVR Drone Hardware\
**Created:** [October 18, 2023, 4:06pm UTC](https://forum.theavr.org/t/jetson-setup-issue/668 "2023-10-18T16:06:01Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![MDRobinson](https://avatars.discourse-cdn.com/v4/letter/m/e19b73/32.png) [@MDRobinson](https://forum.theavr.org/u/MDRobinson)\
**Post date:** [October 18, 2023, 4:06pm UTC](https://forum.theavr.org/t/jetson-setup-issue/668/1 "2023-10-18T16:06:01Z")

</div>

We’re a new team and this is our first competition. When setting up our Jetson, we had two set of cable to connect to the WiFi adapter card. One set the pens are too large, but they have a female connector that connects to the antenna. We found another set of cables that snaps into place on the adapter card, but they have male connector and our antennas have male connectors. Are we missing something? Should we have another set of antennas?

---

<div class="post-metadata">

**Author:** ![SizzlinSeal](https://avatars.discourse-cdn.com/v4/letter/s/e99b99/32.png) [@SizzlinSeal](https://forum.theavr.org/u/SizzlinSeal)\
**Post date:** [October 19, 2023, 10:45pm UTC](https://forum.theavr.org/t/jetson-setup-issue/668/2 "2023-10-19T22:45:01Z")

</div>

We had the same problem with our kit. Fortunately one of our team members had their own jetson nano with wifi card pre-installed. Seems to be an oversight with the kit