# DEXI Sensor Specifications and Laser Activation

**URL:** <https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897>\
**Category:** Technical Support (Official)\
**Created:** [September 11, 2024, 9:20pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897 "2024-09-11T21:20:21Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![Shivam](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@Shivam](https://forum.theavr.org/u/Shivam)\
**Post date:** [September 11, 2024, 9:20pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/1 "2024-09-11T21:20:21Z")

</div>

Hello,

For the DEXI, what IR sensor and laser module should we be using? Is there one suggested, or should we buy our own? Also, for the laser usage, what is the timing or delay we should have on our laser for the 5 hits needed to weld the cracks in the bridge. Thank you!

Shivam Patel

---

<div class="post-metadata">

**Author:** ![Shivam](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@Shivam](https://forum.theavr.org/u/Shivam)\
**Post date:** [September 11, 2024, 9:54pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/2 "2024-09-11T21:54:40Z")

</div>

Also, for the IR LED, what is the sensor being used to transmit the beams to the DEXI, so if we do need to find our own sensor we know what to look for. Thank you again!

---

<div class="post-metadata">

**Author:** ![droneblocks](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/droneblocks/32/159_2.png) [@droneblocks](https://forum.theavr.org/u/droneblocks)\
**Post date:** [September 12, 2024, 1:31am UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/3 "2024-09-12T01:31:44Z")

</div>

Starting next week we will be shipping the sensor kits that will include the IR emitter/receiver, laser, mosfet, and stl files to print and mount everything to DEXI. We will also be publishing content for wiring and programming the week after that. To answer your other question this will be the IR combo you’ll be receiving:

> **[IR Break Beam Sensor with Premium Wire Header Ends - 5mm LEDs](https://www.adafruit.com/product/2168)**
>
> Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way ...

The emitter will be for test purposes and is what will be mounted throughout the field. I hope this helps and please don’t hesitate to follow up with any other questions.

---

<div class="post-metadata">

**Author:** ![aceleski](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@aceleski](https://forum.theavr.org/u/aceleski)\
**Post date:** [September 23, 2024, 11:22pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/4 "2024-09-23T23:22:10Z")

</div>

Hello, have the kits been shipped? We have not received ours. Thanks

---

<div class="post-metadata">

**Author:** ![droneblocks](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/droneblocks/32/159_2.png) [@droneblocks](https://forum.theavr.org/u/droneblocks)\
**Post date:** [September 24, 2024, 2:14pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/5 "2024-09-24T14:14:37Z")

</div>

Yes, as of yesterday all laser kits have shipped. Your team should receive it this week. In the kit there will be a sheet of paper with a QR code to the course on wiring/programming.

---

<div class="post-metadata">

**Author:** ![CoastJRA](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/coastjra/32/352_2.png) [@CoastJRA](https://forum.theavr.org/u/CoastJRA)\
**Post date:** [September 26, 2024, 12:17am UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/6 "2024-09-26T00:17:01Z")

</div>

Is there a tracking number we can get or a way to get the tracking number

---

<div class="post-metadata">

**Author:** ![droneblocks](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/droneblocks/32/159_2.png) [@droneblocks](https://forum.theavr.org/u/droneblocks)\
**Post date:** [September 26, 2024, 2:06am UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/7 "2024-09-26T02:06:22Z")

</div>

What school are you with? I’ll see if I can dig up the tracking for you.

---

<div class="post-metadata">

**Author:** ![aceleski](https://avatars.discourse-cdn.com/v4/letter/a/dc4da7/32.png) [@aceleski](https://forum.theavr.org/u/aceleski)\
**Post date:** [September 28, 2024, 5:17pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/8 "2024-09-28T17:17:23Z")

</div>

We are The Flying Deloreans with Rotorhead Drones and Robotics Club. We have still not received the kit.

---

<div class="post-metadata">

**Author:** ![Shivam](https://avatars.discourse-cdn.com/v4/letter/s/ce73a5/32.png) [@Shivam](https://forum.theavr.org/u/Shivam)\
**Post date:** [September 28, 2024, 5:36pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/9 "2024-09-28T17:36:06Z")

</div>

I am with Team Daedalus at Ideaventions Academy. Could we also receive a tracking number?

---

<div class="post-metadata">

**Author:** ![GymLeaderBrock](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/gymleaderbrock/32/452_2.png) [@GymLeaderBrock](https://forum.theavr.org/u/GymLeaderBrock)\
**Post date:** [September 28, 2024, 6:06pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/10 "2024-09-28T18:06:30Z")

</div>

Highland Park Highschool - Zephyrus

---

<div class="post-metadata">

**Author:** ![droneblocks](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/droneblocks/32/159_2.png) [@droneblocks](https://forum.theavr.org/u/droneblocks)\
**Post date:** [September 30, 2024, 1:38pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/11 "2024-09-30T13:38:58Z")

</div>

@aceleski [https://tools.usps.com/go/TrackConfirmAction?qtc\_tLabels1=9434611105501205933837](https://tools.usps.com/go/TrackConfirmAction?qtc_tLabels1=9434611105501205933837)

@Shivam [https://tools.usps.com/go/TrackConfirmAction?qtc\_tLabels1=9434611105501205978296](https://tools.usps.com/go/TrackConfirmAction?qtc_tLabels1=9434611105501205978296)

@GymLeaderBrock working on getting yours tracked down

---

<div class="post-metadata">

**Author:** ![droneblocks](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/droneblocks/32/159_2.png) [@droneblocks](https://forum.theavr.org/u/droneblocks)\
**Post date:** [September 30, 2024, 2:02pm UTC](https://forum.theavr.org/t/dexi-sensor-specifications-and-laser-activation/897/12 "2024-09-30T14:02:48Z")

</div>

@GymLeaderBrock [https://tools.usps.com/go/TrackConfirmAction?qtc\_tLabels1=9434611105501205660122](https://tools.usps.com/go/TrackConfirmAction?qtc_tLabels1=9434611105501205660122)
