# Dexi drone on FIRE

**URL:** <https://forum.theavr.org/t/dexi-drone-on-fire/1015>\
**Category:** Technical Support (Official)\
**Created:** [November 13, 2024, 10:59pm UTC](https://forum.theavr.org/t/dexi-drone-on-fire/1015 "2024-11-13T22:59:41Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![droneblocks](https://yyz1.discourse-cdn.com/flex007/user_avatar/forum.theavr.org/droneblocks/32/159_2.png) [@droneblocks](https://forum.theavr.org/u/droneblocks)\
**Post date:** [November 14, 2024, 1:39am UTC](https://forum.theavr.org/t/dexi-drone-on-fire/1015/4 "2024-11-14T01:39:03Z")

</div>

@kendrakay2000 really sorry to hear this happened. We posted an update in a thread here:

> [@ALERT: Please Remove DEXI Rolo to Prevent Potential ESC Damage](https://forum.theavr.org/t/alert-please-remove-dexi-rolo-to-prevent-potential-esc-damage/994):
>
> It has been brought to our attention that improper DEXI rolo mounting can lead to a potential ESC failure. If the rolo screw is extremely overtightened and your DEXI sustains a rough landing, there is a chance the rolo screw can make contact with the top of the ESC. We are recommending that your DEXI rolo be removed from the bottom plate. It mainly served as a protective measure for users that opted not to use landing gear. Now we are recommending the use of either our short landing gear: [DEXI…](https://github.com/DroneBlocks/dexi-3d-prints/blob/main/dexi-5/DEXI%20Landing%20Gear%20Talon.stl)

We also posted in Discord, sent an email, and then at the event during the pre-competition drone inspection we requested all of the “Rolos” to be removed.

That being said, let me take a shot at your QGC issue. Have you gone through the sensor calibration? I’m questioning if your ARK board is okay, but doing a full calibration will give us more info.

Thank you.

---

_[View the full topic](https://forum.theavr.org/t/dexi-drone-on-fire/1015)._