# Connecting the PCC buck Convertor to PCC

**URL:** <https://forum.theavr.org/t/connecting-the-pcc-buck-convertor-to-pcc/628>\
**Category:** Technical Support (Official)\
**Created:** [October 9, 2023, 5:53pm UTC](https://forum.theavr.org/t/connecting-the-pcc-buck-convertor-to-pcc/628 "2023-10-09T17:53:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![valcardenas](https://avatars.discourse-cdn.com/v4/letter/v/aca169/32.png) [@valcardenas](https://forum.theavr.org/u/valcardenas)\
**Post date:** [October 9, 2023, 5:53pm UTC](https://forum.theavr.org/t/connecting-the-pcc-buck-convertor-to-pcc/628/1 "2023-10-09T17:53:45Z")

</div>

ON the last step of the Top Accessory Plate Assembly it says"Finally, cut the positive and negative wires from the PCC buck converter to length" it does not show which wires from where to where .

---

<div class="post-metadata">

**Author:** ![Andrew\_R](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Andrew\_R](https://forum.theavr.org/u/Andrew_R)\
**Post date:** [October 12, 2023, 3:49am UTC](https://forum.theavr.org/t/connecting-the-pcc-buck-convertor-to-pcc/628/2 "2023-10-12T03:49:13Z")

</div>

Hello Valcardenas,

I’ll provide pictures and a video that demonstrate the wire’s location.

 ![Wire 1](https://canada1.discourse-cdn.com/flex007/uploads/avr/original/1X/ed14c01a3d333f8af67a6aa279475fca6d57e065.jpeg)

 ![Updated_wired](https://canada1.discourse-cdn.com/flex007/uploads/avr/original/1X/dc6dabcbfcefe8e75c2561cb15fcddee7f127edf.jpeg)  
 ![Updated_wire2](https://canada1.discourse-cdn.com/flex007/uploads/avr/original/1X/cdc1c11ce3ff338fef03ba6a69e05d1153efa26a.jpeg)  
 ![last](https://canada1.discourse-cdn.com/flex007/uploads/avr/original/1X/77010e4bb8ef5eacb4bdbae4a5c54448047f9f8a.jpeg)

Sorry if it’s difficult to tell where the wire leads!